# Resolving git rebase CONFLICT: A Complete Guide to continue, abort, and skip Ever been rebasing a feature branch onto main when the terminal suddenly froze like this? ``` CONFLICT (content): Merge conflict in src/app.js error: could not apply a1b2c3d... feat: add login hint: Resolve all conflicts manually, mark them as resolved with hint: "git add/rm ", then run "git rebase --continue". ``` The first questions that usually pop into your head are: "Do I need to commit here? If I hit `abort`, will all my work vanish?" Let's cut to the chase: **running `git rebase --abort` restores you 100% to the exact state just before you started the rebase.** Your work will not disappear. So take your hands off the keyboard and read this slowly. ## Why rebase "stops": start with the mental model The biggest difference between merge and rebase is **the unit at which conflicts are handled**. - **merge**: Both branches are combined at once, so every conflict hits you in one shot. - **rebase**: Your commits are **replayed one by one** on top of main. Conflicts therefore pause one commit at a time. In other words, a stopped rebase is a signal that says: "I hit a conflict applying the Nth commit—fix just this one and I'll keep applying the rest." Think of it as a **pause button**, not a scary error. As of 2026, more teams on GitHub and GitLab default to a "Rebase and merge" policy, so even junior developers hit this screen far more often. VS Code or Cursor's merge editor and AI assistants can help with the markers, but **when to run `--continue` is still a human decision**. ## Where did you stop? How to read git status When you're panicking, the first command to run is just one: `git status`. ```bash $ git status interactive rebase in progress; onto 9f8e7d6 Last command done (1 command done): pick a1b2c3d feat: add login Next commands to do (2 remaining commands): pick b2c3d4e feat: add logout pick c3d4e5f refactor: auth util You are currently rebasing branch 'feature/auth' on '9f8e7d6'. Unmerged paths: (use "git restore --staged ..." to unstage) (use "git add ..." to mark resolution) both modified: src/app.js no changes added to commit (git add will track these changes) ``` Here's a table of what each line means. | Actual output | Meaning | What to do next | |---|---|---| | `interactive rebase in progress` | You're paused in the middle of a rebase | Don't create a new commit; figure out the state first | | `Last command done (1 command done)` | The commit that just failed to apply | Resolve this commit's conflicts | | `Next commands to do (2 remaining)` | How many commits still need to be applied | Be aware more conflicts may appear after this one | | `Unmerged paths:` | Files that still have conflicts | Edit these files yourself | | `both modified: src/app.js` | Both main and your commit changed the same place | Open this file and resolve the markers | | `(use "git add ...")` | Mark resolution with `git add` | After editing, `git add` | The key takeaway: you only need to touch files marked `both modified`. ## The standard fix: resolve conflict markers → add → --continue Open `src/app.js` and you'll see markers like this. ```javascript function getUser() { <<<<<<< HEAD // ⬆️ 윗쪽 = main(이미 얹힌 쪽) return fetchUser({ cache: true }); ======= // 경계선 return fetchUser({ cache: false, retry: 3 }); >>>>>>> a1b2c3d (feat: add login) // ⬇️ 아랫쪽 = 지금 얹으려는 내 커밋 } ``` Remember just two things when reading the markers. - `<<<<<<< HEAD` ~ `=======` : **code already on main** (the side that's already been applied) - `=======` ~ `>>>>>>> a1b2c3d` : **your commit that's being applied now** Manually combine them into the final form you want, then **delete all three marker types** (`<<<`, `===`, `>>>`). ```javascript function getUser() { return fetchUser({ cache: true, retry: 3 }); // 두 의도를 합친 최종 결과 } ``` Here's the full workflow, ready to copy-paste. ```bash # 1) 어디서 멈췄는지 확인 git status # 2) both modified 파일을 에디터로 열어 마커(<<<, ===, >>>)를 직접 해소 # (VS Code/Cursor 머지 에디터로 해도 됨) # 3) 해결한 파일을 '해결됨'으로 표시 — commit이 아니라 add! git add src/app.js # 4) rebase 계속 진행 (다음 커밋을 마저 얹는다) git rebase --continue # 5) 다음 커밋에서 또 충돌나면? → 2~4번을 그대로 반복 ``` ### Why you must not run `git commit` here A common mistake is habitually running `git commit` after resolving conflicts. ```bash # ❌ 잘못된 예 git add src/app.js git commit -m "fix conflict" # 불필요한 커밋이 끼어들어 히스토리가 더러워진다 # ✅ 올바른 예 git add src/app.js git rebase --continue # 원래 커밋에 해결분을 합쳐 깔끔하게 진행 ``` During a rebase, Git is "replaying the original commit," so `--continue` finishes that commit for you. If you commit yourself, an extra stray commit appears and the history gets messy. ## Escape hatches: 100% restore with --abort, and the danger of --skip ### --abort: safely back to the start anytime If the merge is too messy, or you think "this isn't the time," don't hesitate—abort. ```bash git rebase --abort ``` This command **fully restores the state just before the rebase started (ORIG_HEAD)**. It doesn't matter if you've already `--continue`d two or three times. No matter where you paused, one abort puts everything back as it was. There's zero reason to panic-force-push because you're afraid of losing work. ### --skip: a dangerous command that can drop code ```bash git rebase --skip ``` `--skip` **discards the entire changeset of the currently conflicting commit** and moves on to the next one. That commit's code can disappear from the result. Use it only in these two cases: - The commit's changes are already on main, so it became an **empty commit** - You deliberately decided to drop that commit If you're not sure, `--abort` is always safer than `--skip`. ### 3-way comparison table | Command | What it does | Does work get lost? | When to use | |---|---|---|---| | `git rebase --continue` | After resolving conflicts, proceed to the next commit | No | After you resolve markers and `add` | | `git rebase --abort` | Fully restore to just before the rebase started | **Not at all** | When it's messy or you're unsure; start over | | `git rebase --skip` | Drop the current commit's changes and move on | **They can be discarded** | Empty commits / changes already applied only | ## Wrap-up: use rerere for repeated conflicts, plus a never-do list On a long rebase you may resolve the same conflict more than once. Turn on **rerere** (reuse recorded resolution) and Git remembers how you resolved it and auto-applies it next time. ```bash git config --global rerere.enabled true ``` Finally, a checklist of things you must **never do** during a rebase. - ❌ Running `git commit` yourself after resolving conflicts → ✅ `git rebase --continue` - ❌ Creating a new branch or starting other work mid-rebase → Finish or abort first - ❌ Blind `git push -f` → you can overwrite teammates' commits - ✅ If you truly need a force push, use `--force-with-lease` ```bash # ❌ 위험: 원격이 바뀌었어도 무조건 덮어씀 git push -f # ✅ 안전: 내가 본 이후 원격이 바뀌었으면 거부됨 git push --force-with-lease ``` **A note from the field:** As a junior I was so scared of the conflict screen that I force-pushed instead of aborting—and wiped a teammate's commits. After that I made one rule: "If you're not sure, always `--abort`." Abort costs nothing, and you can retry a rebase as many times as you want. Don't flee to a dangerous command just because you're afraid. ## FAQ **Q. Does `git rebase --abort` delete all the code I've been working on?** A. No. Abort only restores the exact commit state from just before the rebase started. Work already committed on the branch is preserved. You can press it with confidence. **Q. I resolved the conflicts but I still see `You have unmerged paths`.** A. You probably edited the files but didn't mark them resolved with `git add`. Run `git add `, check `git status` again to confirm unmerged paths are gone, then run `git rebase --continue`. **Q. If I'm unsure between `git rebase --continue` and `git rebase --skip`, which should I use?** A. If you need to keep the changes, resolve the conflict and `--continue`. If it's OK to drop that commit, `--skip`. If you're not sure, press neither—`--abort` back to the start and try again slowly.

#rebase continue abort

git rebase 충돌(CONFLICT) 해결법: continue·abort·skip 차이